The hard drive does not show up on my computer. What to do if the computer does not see the internal hard drive Displaying the hard drive
Most users create partitions on their hard drive for their convenience. They are usually called C, D, etc., and their usefulness cannot be denied in any way. Let's say you have an operating system on one volume, and all other user files (music, photos, movies) on the second. When you reinstall the OS, the partition with your files will not even be touched, which will allow you to save your data and continue to use it in the new Windows.
One of the extremely common problems that users often encounter is that the computer does not see hard drive partitions and cannot find them. This problem occurs unexpectedly and can be caused by a number of reasons that affect the operation of the hard drive. Let's figure out what to do in this situation and how to solve the problem that has arisen.
If suddenly the volume you need has not only disappeared, but the format has changed to RAW, then to solve the problem, I recommend that you familiarize yourself with.
Assigning a letter
If your PC or laptop does not see one of the hard drive partitions, then the first thing you need to do is go to the special control menu and check whether it is displayed in the corresponding list. If it is there, then it needs to be assigned a letter.
Let's look at the process in order:
The requested information will be instantly displayed on the screen. It is necessary to look through the local drives, and if there is one that has disappeared, then you need to set the letter.
To do this you need:
For the changes to be successfully applied, you need to restart your computer. As soon as the operating system boots, check whether the partition is visible, it should appear under the letter you specified.
Creating a new volume
It is likely that when you go to the management menu you will not find the missing area, instead there will be an unallocated part that cannot be assigned a letter; you can only create a new volume:
But at the same time, you will completely lose the files stored on it. Therefore, if you do not value them, then feel free to use this method; in other cases, I recommend using the method discussed below.
All processes are analyzed using Windows 7 as an example, but in other versions, Windows XP/8/10, they will be similar.
Creating a new partition
If the first method did not help and the computer still does not see the hard drive partitions, then the problem may be that the OS itself cannot see it due to the loss of the file system, as often happens, but the data on it will still be saved.
In this case, to correct the situation, we will use one very effective tool, namely the Acronis Disk Director program. With its help, we will recognize the disappeared local hard drive partition, separate a small part from it, from which we will make a new area with the NTFS file system, and then simply merge them.
This may seem very difficult to some, but if you follow the following instructions, which detail what to do in this situation, you will easily cope with this task:
After you create a partition, all that remains is to merge the problematic and new partitions using the “Merge” function.
Now you need to save the changes and reboot the system. To do this, you need to enter the BIOS again and return the boot to its original location - from the Hard Disk. After exiting the BIOS, the system will automatically boot into Windows OS. We check the disk partition again, now it should definitely be displayed correctly.
Partition recovery
In almost all cases when a logical partition of a hard drive disappears, it can be returned. For recovery we will use the same Acronis Disk Director.
So here's how to do it:
The procedure for restoring information from a partition that the PC has stopped seeing can take a significant amount of time. The duration of the process depends on the amount and volume of data available on the disk. Therefore, you should be prepared for the fact that the computer may work for quite a long time.
We hope that the methods we have listed for solving the problem are easy to implement, and you can use them to fix the problems that have arisen.
A personal computer, like any other equipment, requires updating its components, most often the hard drive. However, there are times when, after installing a new part or system failures, the hard drive does not appear on the PC. What to do in this situation and how to fix it?
The first way to solve the problem
Using standard Windows 7 tools, you can solve the problem when the My Computer folder does not display the hard drive, as follows.
Click “Start”, “Computer” and right-click, selecting “Management”.
Open the “Storage Devices” branch and click “Disk Management”.
A list of all disks in the system will be displayed here. Right-click on the one that is not displayed. Select “Change drive letter or drive path.”
After the window with the choice of operations appears, click “Change”.
Select a letter and click “OK”.
You can change the letter and then return it back. Sometimes this action is not enough for the computer to see the disk.
If the drive is new, there will be no “Change drive letter...” option. Therefore, right-click on the non-defining device and select “Create simple volume”.
Assign a new drive letter. And reboot the PC.
WARNING: All data on this disk will be deleted.
It is worth noting that this problem may also lie in the absence of a driver or its error. To do this, find out the model of the motherboard. You can open the cover of the system unit and see the name. Or run the command line. To do this, press “Win + R” and enter “cmd”.
Now let's look at the motherboard model.
We go to the manufacturer’s website, look for the required driver, download, install and reboot the PC to make changes to the system.
Physical method for solving the problem
This option should not be ignored, since often the wiring from the hard drive comes loose and this problem must be corrected manually.
To do this, you need to turn off the PC and remove the side cover of the system unit. Then we disconnect all the wires that go to the hard drive and insert them back.
Now turn on the computer and check if the hard drive is visible.
All these methods are also relevant for the problem when the external hard drive is not displayed and is not recognized by the system.
SoftikBox.com
Hard drive not showing up in windows
Good afternoon.
Many users have at least once thought about purchasing a new hard drive. And, probably, the dream has come true - since you are reading this article...
In fact, if you connect a new hard drive to the system unit, you are unlikely to see it when you turn on the computer and load the Windows OS. Why? Because it is not formatted, and windows does not show such disks and partitions in “my computer”. Let's look at a way to restore visibility...
What to do if the hard drive is not displayed in Windows - step by step
1) Go to the control panel, you can immediately enter the word “administration” into the search form. Actually, the first link that appears is what we need. Let's move on.
3) In the computer management window that opens, we are most interested in the “disk management” tab (located at the very bottom, in the left column).
For those whose hard drive will not be displayed here, the end of this article is dedicated. I recommend checking it out.
4) After this, you should see all the drives connected to the computer. Most likely, your disk will be found and marked as an unallocated area (i.e., in other words, not formatted). An example of such an area is in the screenshot below.
5) To correct this misunderstanding, right-click on the disk or disk partition that is not allocated (or not partitioned; depends on your version of the Windows translation into Russian) and select the format command.
Attention! All data on the disk that is formatted will be deleted. Make sure that the system has not made a mistake and is actually showing you the disk on which you do not have the necessary information.
In my example, I will try to format an external hard drive to make it more clear.
The system will ask again whether to format correctly.
And after that it will ask you to enter settings: file system, disk name.
6) After formatting the disk, it should appear in the “my computer” section, as well as in Explorer. Now you can copy and delete information to it. Check functionality.
What should I do if the hard drive is not displayed in the "computer management" section?
In this case, there may be several reasons. Let's look at each of them.
1) Hard drive not connected
Unfortunately, the most common mistake. It is possible that you forgot to connect one of the connectors to the hard drive, or they simply do not make good contact with the outputs on the drive case - i.e. Roughly speaking there is no contact. Perhaps you need to change the cables, the issue is not expensive in terms of price, just troublesome.
To make sure of this, enter the BIOS (when booting the computer, press F2 or Delete, depending on the PC model) and see if your hard drive is recognized there. For example, in the screenshot below you can see that the BIOS correctly detects the hard drive, which means it is connected to the computer.
If Windows doesn’t see it, but Bios sees it (which I’ve never seen before), then use programs such as Partition Magic or Acronis disk director. They see all the disks connected to the system and allow you to perform many operations with them: merging partitions, formatting, resizing partitions, etc. Moreover, without losing information!
2) The hard drive is too new for your PC and BIOS
If your computer is already quite old, then it is possible that the system simply will not be able to see the hard drive and recognize it in order to work with it correctly. In this case, we can only hope that the developers have released a new version of Bios. If you update the Bios, your hard drive may become visible and you will be able to use it.
Social buttons:
pcpro100.info
The computer does not see the hard drive
People who use removable storage devices sometimes encounter situations where the computer (PC) does not see the hard drive (HDD). Disks, such as Transcend, Western digital, Seagate, Samsung, Ide, are gaining increasing popularity and demand among people of different ages and are used for personal purposes, in study and work. Their main purpose is the storage and exchange of information between people, and due to its minimal size, almost comparable to the parameters of a mobile phone, it can be easily stored among personal belongings taken with you, accommodating thousands of gigabytes.
It’s worth saying right away that cases when the computer does not see the hard drive occur quite often and turn out to be very unpleasant, especially when there is not much time. Let's try to understand the causes and possible solutions to this problem.
First of all, it is necessary to separate whether the disk is new or previously used - this is essential in the solution methods.
The new HDD is not displayed on Windows 7, 8, 10
By a new hard drive, we mean, as is already clear, not its age, but the fact that it has never been written to and, accordingly, has not been connected to a computer or laptop.
- Right-click on the “My Computer” shortcut and select “Manage”.
- Find and click on “Disk Management“, a window will open displaying the disks connected to the PC.
Drive letter value
A common cause of an error displaying a connected drive is the incorrect assignment of the drive letter, as a result of which the computer does not display it. It is necessary to determine the connected external hard drive HDD, detected by its name, size in MB (details are located at the bottom of the window) and distinguishable from the disk registered by the system, C, D, or other local disk marked when installing the operating system.
You can be sure that you have identified exactly the connected HDD: without closing the “Disk Management” window, unplug it and reconnect it to the computer; accordingly, it will disappear from the list and appear.
- Then right-click on it and select another sequential letter after those available in the system.
The disk is not formatted
Very often, connected hard drives are not visible on the computer due to the fact that they are new and have not been previously formatted. If they are detected in the “Disk Management” menu, you will not be able to change the letter value of such a disk, due to the lack of such a function. Here you need to select the “Create simple volume” option:
Please note that during volume creation, formatting will occur - along with the markup, the disk will be completely erased. As a result, the information stored there (if you are not sure exactly) will be completely deleted.
Lack of drivers
Another common reason that a hard drive connected to a PC is not visible is the lack of drivers for it. Despite the fact that the Windows system takes such cases into account and reacts, trying to select from the available ones or showing a window with the necessary search for drivers for the connected device. But still, failures occur and it may be that no information from the computer regarding this will appear.
- In this regard, you first need to make sure that the USB port to which you connected is working. This can be done by connecting something else that is accurately detected by the computer (for example, a flash drive).
- Then go to the “Device Manager” (menu “Start” -> “Control Panel” -> “System and Security” or the key combination “Win + Pause Break” and select “Device Manager”).
- Open the “Disk devices” tab.
- “Other devices” and see if a device not recognized by the system is displayed with a yellow icon with an exclamation mark. If there is such a name or an undefined device (for example, the inscription “My passport”), right-click on it and select “Update drivers.”
- Searching and updating drivers can be done automatically, using special programs in the article The best program for installing and updating drivers (determining the appropriate driver by hardware ID and a link to find it on the Internet).
- You can also try selecting the “Update system configuration” command in the “Action” tab. After which, the existing devices will be searched and the corresponding drivers will be installed.
The connected HDD that was previously used is not visible
If a disk that was previously used is not displayed, or, moreover, information is already stored on it, then you definitely need to make sure (if you don’t know for sure) that this hard drive is working by connecting it to another computer or laptop. The USB port to which the connection was made must also be in working order, and if you need to check it by connecting another device (flash drive) or check it by connecting the drive to another connector.
- If you are sure that the HDD along with the USB port is working, then you need to open the “Disk Management” menu (Right-click on “My Computer” and select “Manage” and then click “Disk Management”) and look at the available disks and their affiliation to the letter value (determined by name and size). If there is such a disk, then by right-clicking on it, select “Change drive letter”, then click “Change” and set the next letter after the drive letters already available on the computer.
- There are cases when such disks may contain viruses and prevent them from being displayed correctly in the system or be blocked by some antiviruses (low-cost free antiviruses can do this), as a result the hard disk is not visible on the computer.
You can solve this problem by reconnecting or by trying to find this disk in the “Disk Management” menu (above) and also changing the letter value, perhaps some message from the antivirus will appear (about the presence of viruses or its blocking or “access denied”) and decide by checking for viruses or checking for viruses on another computer. After that, reconnect to the computer - if the viruses were really present and were removed as a result of the scan, then now this hard drive should start without problems (unless, of course, it was blocked for this reason).
- In the Device Manager, in the “Disk devices” or “Other devices” sections, you need to look for the presence of certain or undefined devices with an exclamation mark in yellow, indicating that the equipment is not installed correctly (explanation above in the text “lack of drivers”). If errors of this kind occur, you need to reinstall the USB controller drivers on your computer (by first updating the hardware configuration in the “Task Manager” and trying to connect the drive after restarting the computer).
- A faulty cord may also be the cause of this problem.
pc4me.ru
The hard drive does not appear in my computer, solution to the problem
Every person must first understand what a computer part like a hard drive is. People often call it a hard drive, but the main definition of this part is a device capable of storing data accumulated by a person. In fact, it is on the hard drive that all the information that is on the computer is stored. The hard drive can contain an operating system, software and many system files needed for operation. 
For this reason, when a device cannot detect the driver it needs, an informational error message pops up, and the person immediately tries to figure out what needs to be installed to fix the impending problem.
Carrying out diagnostic measures.
It turned out that if the hard drive was not detected by the system, then you don’t need to immediately get upset and give up, just study what the problem is. This could be a system error or a malfunction of the device itself. To quickly perform a check, you need to remove the hard drive and connect it to another computer. If it is working, then the system will quickly recognize it, and there will be no need to take it to a repair shop, provided that if the hard drive is not detected on another computer, you need to understand that you will most likely have to contact a repair shop. Some people try to fix the problem of hard drive malfunction on their own, and only make it worse, because the workshops are staffed by experienced specialists who know a lot about this matter. 
Useful tips
To get into the BIOS settings, just press the Delete button or F2. - You should pay close attention to which outputs you pull out the SATA cable from. - When you have pulled your hard drive out of the system unit, it is better to correctly wrap it in “Antistatic.” The part of the device located at the bottom is also placed on “Antistatic”.
Ways to fix basic problems.
There are a number of problems that you can fix on your own without turning to professional help.
The first problem lies in the outgoing contacts.
This is the most common problem, because it happens that no power is supplied to the hard drive. The problem is easy to fix; you need to remove the cover of the system unit and reconnect all cables to the hard drive.
The second problem is hidden in incorrect BIOS settings.
If you have the wrong system date set in your settings, this may indicate a problem. And it turned out that these settings can be easily reset. It turned out that this simple manipulation can be performed by removing the BIOS battery, after it has been removed, you need to wait thirty minutes, and then perform the reverse action - install it in its original place. After these steps, your hard drive will need to be identified as a device. The third problem is not enough power for the device.
If you start to notice an interesting pattern that your device is connecting and disconnecting again, then you need to think about the fact that it does not have enough power. You will need to disassemble the system unit, and then disconnect some device that is less important than the hard drive. 
The fourth problem concerns conflicts among connected devices.
If you have two hard drives installed on your computer, and each of them is the same brand, then there is likely a device conflict and you will need to give up one of them.
The fifth problem is the version of the installed bus.
In this case, you will only need to change the operating system, because it is no longer suitable for your needs; in addition to reinstallation, you must not forget about integrating drivers for all SATA interfaces.
The sixth and final problem is the incorrect performance of Windows.
Having noticed that the hard drive is displayed correctly in the BIOS settings, but the system does not see it, you need to resort to simple actions: - Open a menu on the computer such as “Control Panel”. - Double-click on the “Administration” item. 
- When the desired window opens, you must select “Computer Management”. 
- On the left is an item with an interesting name “Disk Management”. 
It is in the central part of this window that all connected drives to the computer will be located. If you right-click on any of them, you can call up automatic disk setup and create data in it that will later be needed. It turned out that it was necessary to change the name of the hard drive, and then reboot our device. If you have carried out all the steps and realized that not one of them helps to resuscitate the patient, then you should understand that you simply need the help of computer specialists.
People who use removable storage devices sometimes encounter situations where the computer (PC) does not see the hard drive (HDD). Disks, such as Transcend, Western digital, Seagate, Samsung, Ide, are gaining increasing popularity and demand among people of different ages and are used for personal purposes, in study and work. Their main purpose is the storage and exchange of information between people, and thanks to its minimal size, almost comparable to the parameters of a mobile phone, it can be easily stored among personal belongings taken with you, accommodating thousands of gigabytes.
It’s worth saying right away that cases when the computer does not see the hard drive occur quite often and turn out to be very unpleasant, especially when there is not much time. Let's try to understand the causes and possible solutions to this problem.
First of all, it is necessary to separate whether the disk is new or already previously used– this is essential in solution methods.
HDD hard drive on Windows 7, 8, 10
By a new hard drive, we mean, as is already clear, not its age, but the fact that it has never been written to and, accordingly, has not been connected to a computer or laptop.
- Click on the shortcut " My computer"right click and select " Control«.
- Find and click on “ Disk management", a window will open displaying the drives connected to the PC.
Drive letter value
A common cause of an error displaying a connected drive is the incorrect assignment of the drive letter, as a result of which the computer does not display it. Necessary detect the connected external hard drive HDD, detected by its name, size in MB (details are located at the bottom of the window) and distinguishable from the disk registered by the system, C, D, or other local disk marked when installing the operating system.
You can be sure that you have identified exactly the connected HDD: without closing the “Disk Management” window, unplug it and reconnect it to the computer; accordingly, it will disappear from the list and appear.
- Then right-click on it and select another sequential letter after those available in the system.
The disk is not formatted
Very often, connected hard drives are not visible on the computer due to the fact that they are new and have not been previously formatted. If you find them in the menu " Disk management“, changing the letter value will not work for such a disk, due to the lack of such a function. Here you need to select the value “ Create a simple volume«:
Please note that during volume creation, formatting will occur - along with the markup, the disk will be completely erased. As a result, the information stored there (if you are not sure exactly) will be completely deleted.
Lack of drivers
Another common reason that a hard drive connected to a PC is not visible is the lack of drivers for it. Despite the fact that the Windows system takes such cases into account and reacts, trying to select from the available ones or showing a window with the necessary search for drivers for the connected device. But still, failures occur and it may be that no information from the computer regarding this will appear.
- In this regard, you first need to make sure that the USB port to which you connected is working. This can be done by connecting something else that is accurately detected by the computer (for example, a flash drive).
- Then go to “ device Manager" (menu " Start" ->» Control Panel» -> « System and safety" or the key combination " Win+Pause Break" and select "Device Manager").
- Open tab " Disk devices«.
- « Other devices» and see if a device not recognized by the system is displayed with a yellow icon with an exclamation mark. If there is such a name or an undefined device (for example, the inscription “My passport”), right-click on it and select “ Update drivers«.
- You can search and update drivers in automatic mode, using special programs in the article (determining a suitable driver by hardware ID and a link to find it on the Internet).
- You can also try selecting the command “ Update system configuration" in the " tab Action". After which, the existing devices will be searched and the corresponding drivers will be installed.
The connected HDD is not visible previously used
If a disk that was previously used is not displayed, or, moreover, information is already stored on it, then you definitely need to make sure (if you don’t know for sure) that this hard drive is working by connecting it to another computer or laptop. The USB port to which the connection was made must also be in working order, and if you need to check it by connecting another device (flash drive) or check it by connecting the drive to another connector.
- If you are sure that the HDD along with the USB port is working, then you need to open the menu “ Disk management" (Pressing " My computer» right key and selecting « Control" and then press " Disk management") and look at the available disks and their affiliation with letter value (determined by name and size). If such a disk exists, then right-click on it and select “ Change drive letter", then the button " Change" and set the next letter after the drive letters already available on the computer.
- There are cases when such disks may contain viruses and prevent them from being displayed correctly in the system or be blocked by some antiviruses (low-cost free antiviruses can do this), as a result the hard disk is not visible on the computer.
You can solve this problem by reconnecting or by trying to find this drive in the “ Disk Management"(above) and also change the letter value, perhaps some message from the antivirus will appear (about the presence of viruses or its blocking or “access denied”) and decide to check for viruses or check for viruses on another computer. After that, reconnect to the computer - if the viruses were really present and were removed as a result of the scan, then now this hard drive should start without problems (unless, of course, it was blocked for this reason).
Good afternoon.
Many users have at least once thought about purchasing a new hard drive. And, probably, the dream has come true - since you are reading this article...
In fact, if you connect a new hard drive to the system unit, you are unlikely to see it when you turn on the computer and boot into Windows. Why? Because it is not formatted, and Windows does not show such disks and partitions in “my computer”. Let's look at a way to restore visibility...
What to do if the hard drive is not displayed in Windows - step by step
1) Go to the control panel, you can immediately enter the word “administration” into the search form. Actually, the first link that appears is what we need. Let's move on.
3) In the computer management window that opens, we are most interested in the “disk management” tab (located at the very bottom, in the left column).
For those whose hard drive will not be displayed here, the end of this article is dedicated. I recommend checking it out.
4) After this, you should see all the drives connected to the computer. Most likely, your disk will be found and marked as an unallocated area (i.e., in other words, not formatted). An example of such an area is in the screenshot below.
5) To correct this misunderstanding, right-click on the disk or disk partition that is not allocated (or not partitioned; depends on your version of Windows translation into Russian) and select the format command.
Attention! All data on the disk that is formatted will be deleted. Make sure that the system has not made a mistake and is actually showing you the disk on which you do not have the necessary information.
In my example, I will try to format an external hard drive to make it more clear.
The system will ask again whether to format correctly.
And after that it will ask you to enter settings: file system, disk name.
6) After formatting the disk, it should appear in the “my computer” section, as well as in Explorer. Now you can copy and delete information to it. Check functionality.
What should I do if the hard drive is not displayed in the "computer management" section?
In this case, there may be several reasons. Let's look at each of them.
1) Hard drive not connected
Unfortunately, the most common mistake. It is possible that you forgot to connect one of the connectors to the hard drive, or they simply do not make good contact with the outputs on the drive case - i.e. Roughly speaking there is no contact. Perhaps you need to change the cables, the issue is not expensive in terms of price, just troublesome.
To make sure of this, enter the BIOS (when booting the computer, press F2 or Delete, depending on the PC model) and see if your hard drive is recognized there. For example, in the screenshot below you can see that the BIOS correctly detects the hard drive, which means it is connected to the computer.
If Windows doesn’t see it, but Bios sees it (which I’ve never seen before), then use programs such as Partition Magic or Acronis disk director. They see all the disks connected to the system and allow you to perform many operations with them: merging partitions, formatting, resizing partitions, etc. Moreover, without losing information!
2) The hard drive is too new for your PC and BIOS
If your computer is already quite old, then it is possible that the system simply will not be able to see the hard drive and recognize it in order to work with it correctly. In this case, we can only hope that the developers have released a new version of Bios. If you update the Bios, your hard drive may become visible and you will be able to use it.
Every person must first understand what a computer part like a hard drive is. People often call it a hard drive, but the main definition of this part is a device capable of storing data accumulated by a person. In fact, it is on the hard drive that all the information that is on the computer is stored. The hard drive can contain an operating system, software and many system files needed for operation.
For this reason, when a device cannot detect the driver it needs, an informational error message pops up, and the person immediately tries to figure out what needs to be installed to fix the impending problem.
Carrying out diagnostic measures.
It turned out that if the hard drive was not detected by the system, then you don’t need to immediately get upset and give up, just study what the problem is. This could be a system error or a malfunction of the device itself. To quickly perform a check, you need to remove the hard drive and connect it to another computer. If it is working, then the system will quickly recognize it, and there will be no need to take it to a repair shop, provided that if the hard drive is not detected on another computer, you need to understand that you will most likely have to contact a repair shop.
Some people try to fix the problem of hard drive malfunction on their own, and only make it worse, because the workshops are staffed by experienced specialists who know a lot about this matter.
Useful tips
- To get into the BIOS settings, just press the Delete button or F2.
- You should pay close attention to which outputs you pull out the SATA cable from.
- When you have pulled your hard drive out of the system unit, it is better to properly wrap it in Antistatic.
- The part of the device located at the bottom is also placed on the Antistatic.
Ways to fix basic problems.
There are a number of problems that you can fix on your own without turning to professional help.
The first problem lies in the outgoing contacts.
This is the most common problem, because it happens that no power is supplied to the hard drive. The problem is easy to fix; you need to remove the cover of the system unit and reconnect all cables to the hard drive.
The second problem is hidden in incorrect BIOS settings.
If you have the wrong system date set in your settings, this may indicate a problem. And it turned out that these settings can be easily reset. It turned out that this simple manipulation can be performed by removing the BIOS battery, after it has been removed, you need to wait thirty minutes, and then perform the reverse action - install it in its original place. After these steps, your hard drive will need to be identified as a device.
The third problem is not enough power for the device.
If you start to notice an interesting pattern that your device is connecting and disconnecting again, then you need to think about the fact that it does not have enough power. You will need to disassemble the system unit, and then disconnect some device that is less important than the hard drive.
The fourth problem concerns conflicts among connected devices.
If you have two hard drives installed on your computer, and each of them is the same brand, then there is likely a device conflict and you will need to give up one of them.
The fifth problem is the version of the installed bus.
In this case, you will only need to change the operating system, because it is no longer suitable for your needs; in addition to reinstallation, you must not forget about integrating drivers for all SATA interfaces.
The sixth and final problem is Windows not working correctly.
Having noticed that the hard drive is displayed correctly in the BIOS settings, but the system does not see it, you need to resort to simple steps.
- Open a menu on your computer such as “Control Panel”.
- Double-click on the “Administration” item.
When the desired window opens, you need to select “Computer Management”.
On the left is an item with an interesting name “Disk Management”.
It is in the central part of this window that all connected drives to the computer will be located. If you right-click on any of them, you can call up automatic disk setup and create data in it that will later be needed. It turned out that it was necessary to change the name of the hard drive, and then reboot our device.
If you have carried out all the steps and realized that not one of them helps to resuscitate the patient, then you should understand that you simply need the help of computer specialists.
