Mouse settings in Windows. Setting up mouse settings in Windows How to set up a gaming mouse on Windows 7
In life, various situations arise in which some individuals gain access to a user’s personal computer without his permission. These could be acquaintances, children, or just those who want to play a joke. In addition, sometimes the cause is a virus that can change system settings.
In today's article we will talk about how to set up a manipulator on the Windows 7 operating system. It is worth noting right away that this is not a particularly complicated process.
Drivers
Optical mice, like other computer hardware, require the right software. Most likely, many users have noticed that the presented device is sold without driver disks, but installation is still carried out. There are two options for how to properly configure the mouse on the Windows 7 operating system programmatically.
If you are using the official version of Windows 7, there is no need to worry, because the developers have thought through everything to the smallest detail. Thus, therefore, the operating system already has the mouse drivers that are needed. Simply insert it into the required connector and wait a while. The operating system will then notify the user that the installation was successful.
This scenario is often used when using a low-quality pirated OS. It is worth noting that the installation of the manipulator will still happen, but when using a wireless type of device or gaming models with many buttons, problems will arise. Thus, it is recommended to first look at the mouse model on the packaging, and then download the necessary drivers from the Internet. You can install them in the same way as any other program.
Buttons
Next, you need to figure out how to properly configure the buttons on the mouse. The instructions that will be presented below are standard for setting many parameters of this device. Thus, it is advisable to remember it. The instructions provide for the following sequence of actions:
1. Open the Start menu.
2. Go to “Devices and Printers”.
3. Go to point 5. If it does not exist, you need to click “Control Panel” and select “Hardware and Sound”.
4. Click "Devices and Printers". As a result, a window will open containing all the devices installed on the computer.
If the drivers have not been previously installed, then the manipulator used will most likely not be displayed here. Then you need to right-click on the required icon. Next, select “Mouse Options”. A window will appear on the screen containing five tabs, each of which is responsible for how to configure the mouse on the Windows 7 operating system. The user needs to use the open tab.
You will be taken to “Button Configuration”. This item is responsible for assigning the main mouse buttons. When the user usually makes a “left click” with his index finger and a “right click” with his middle finger, when setting the pointer, the LMB can act as the right key. At the same time, the RMB performs the functions of the left button. Previously, the function was provided for the convenience of left-handed people, but on the other hand, if the user has been working with his left hand since childhood, there is no point in changing the purpose.
The double-click speed determines how quickly you need to press the LMB before activating a folder, shortcut, etc. Thus, the lower the speed, the longer the time elapses between repeated presses. Even with the lowest speed, you can click at any frequency, because it will still be counted. One of the most useless features is sticking. When activating it, you need to hold down the mouse button for a few seconds so that a frame appears for highlighting the area. True, it will be faster to use standard selection.
Decor
Once you have become familiar with the functional purpose of the mouse, you can move on to visual effects. How can you customize a mouse on the Windows 7 operating system in a style that you like? After repeating the procedure from the previous paragraph, you should go to the “Indicators” tab. A window will appear here that can easily be divided into two components:
List with pictures (here you can see the visual design of the manipulator pointer for different actions in the current configuration);
drop-down list (various design schemes for manipulator pointers are displayed here).
You just need to click on them and select what you need. It is worth noting that such “sets” can be found on the Internet and downloaded.
Options
The next step is to configure how the pointer works. When you go to the “Pointer Options” tab, you can see the following customizable characteristics:
— movement speed (in previous versions of the OS this parameter was called sensitivity);
— “Initial position in the dialog box” (when opening the dialog box, you can automatically move the mouse pointer to the button that is selected by default);
— visibility of the pointer (suitable for people with low vision).
Often users may lose sight of the pointer. Thus, it is proposed to use the settings to activate the cable behind the mouse or turn on a signal that notifies you about the position of the pointer.
Wheel
Oddly enough, it also requires configuration. True, in this case there are not many options. It is only possible to specify how many lines the screen will scroll while turning the mouse wheel. This is set in the appropriate tab. You can customize several lines at once or the entire page. In this case, everything is individual. It depends on the taste and habit of the user. If you have been using your computer for a long time, it is best to leave this setting unchanged. Otherwise, it's worth trying different options to see which one suits you best. Currently, horizontal scrolling is almost never used.
Macro
This is one of the most interesting settings of any mouse. What is she like? In fact, it is a sequence of commands that is activated when you press one button. This is especially convenient in games. For example, the user presses one button, and the game character performs a series of shots, reloads, and also purchases ammunition. And all this happens literally in a second. How is it proposed to configure macros on the manipulator?
You can use the IntelliType Pro program, but it is not efficient enough, so you cannot do without special knowledge in setting up macros. The best option is to use a third-party application. For example, Oscar Mouse Editor. The presented utility makes it possible to assign mouse buttons to any model, increasing the number of operations per second and creating a macro on an intuitive interface. In addition, this software initially contains several macros that are most actively used in games.
Laptop
The Windows 7 operating system is a unified platform that natively contains drivers for any hardware on which it is installed. It doesn't matter what it is, a computer or a laptop. This allows the user not to search for how to configure the mouse on a laptop. After all, all parameters and settings change in the same way as on a computer. In other words, everything happens as described above.
The topic of setting up a mouse equipped with several buttons was not touched upon. True, additional buttons are useless until an additional program is installed on the computer. You will also need to assign macros. If this is not done, they can only be used for games.
Games
If attempts are made to configure the mouse for a game or a specific application, this is done in the toy itself. Today, more and more projects are available where the controls cannot be changed. True, in many games the user has no options. All that remains is to configure the mouse yourself. As for games, their path to performing such an action usually looks the same (“Settings” - “Controls”). A list of all teams present in the game is then displayed. It is enough to simply change what is required by clicking on the desired item and on the key with which it will be activated.
How to set up a mouse on a computer? This article will provide answers to this question, and simple tips for beginners on setting up a computer mouse. It happens that a computer mouse does not work correctly or you need to change its settings for convenient use. Therefore, we will set up a computer mouse for convenient work with it on the computer.
How to set up a mouse on a computer, general information
Hello, friends! In our modern time of computers, it is not possible to work on it without a computer mouse. It is a secondary device for working on a computer; its functions and portability make working on a computer convenient.
Let's talk further about how to set up a mouse on a computer. In principle, you don’t have to configure it if there is no need. But if you play games, or your mouse speed is low, it is quite possible to do this. We will configure the computer mouse in such operating systems as:
- Windows 7;
- Windows 10
The mouse sensitivity will also be adjusted, its pointer and double click will be changed. I’ll tell you about all this further.
Now, we will look at the question of how to set up a mouse on a computer - in the Windows 7 operating system. To do this correctly, follow simple tips. So, first step. Open the Start menu. Next, select from the section category – “Control Panel”. After this, the “Hardware and Sound” section opens (Screen 1).
Then, click on it once to open and find another section - “Mouse” (Screen 2).
And the second step. After clicking this section, a window with settings for the computer mouse will appear. What can you configure here? Basic mouse settings:
- these are pointers, of which there are quite a few;
- you can set other mouse wheel parameters;
- swap mouse button controls;
- you can set the mouse wheel rotation to one click or more;
You can make many other mouse settings. For example, we need to “Enable Sticky”. Place a checkmark in front of this function and click “Apply” so that all settings are saved. Thus, this example helps to understand how it is configured in Windows 7. The same is true for other mouse functions. Next, we will look at setting up a computer mouse in Windows 10.
Setting up a Windows 10 computer mouse
Setting up a computer mouse in Windows 10 is quite simple. Through the "Start" menu, look for "Control Panel" and go to the customizable functions "Mouse". Next, open the mouse settings window.
For example, we need to change one mouse button to another. Click on the checkbox opposite – “Change the meaning of buttons” and confirm this action with the “OK” button (Screen 3).
After this, the left mouse button will work on the right side, and the right mouse button on the left. There you can also adjust mouse speed, pointers, stickiness and much more.
Adjusting mouse sensitivity
The sensitivity of a mouse is its operating speed. Typically, a computer mouse operates at standard speed. Her usual speed is low. There is a need to increase sensitivity.
For example, while playing games, surfing the Internet, or performing other complex computer tasks. Increased mouse sensitivity can be adjusted quickly.
Setting the sensitivity of a computer mouse in operating systems 7 and 10 is the same. Therefore, we again go to the properties of your mouse (we discussed the process of going to settings earlier).
In order to reduce the sensitivity of the mouse, scroll the slider to the left and click “OK” or “Apply”. After this, you may notice how the mouse pointer moves slowly across the desktop.
If we want to increase its sensitivity, move the same slider to the right and click “Apply” again. Now, the mouse on the computer will work quickly, without time delays.
Adjusting mouse sensitivity in Windows 10
To correctly set the mouse sensitivity, write “Mouse” in the search in Windows 10 on your computer and go to “Mouse Options”. Next, you will be offered several settings to choose from. We move the mouse cursor over – “Select how many lines should be scrolled at one time.” And set the slider in the direction you need.
You can also enable the function to scroll inactive windows when you hover over them with the mouse. All changes in this system are saved automatically.
How to change mouse pointer, double click setting
The mouse pointer is the arrow that we see when we hover the cursor over any object on the computer. If you want to change it to a different type of pointer, to do this, go to “Mouse Properties” again. Then, open the “Indicators” section (Screen 5).
The presented list of pointers shows that there are many of them. Select any of them and click “Apply”. You can also use the “Browse” button to load a pointer image from your computer into these settings. And change it to another pointer icon.
When opening a folder on your computer, you have to click on it several times. Therefore, it is possible to configure a double click of the mouse. Go to these settings in the “Mouse Buttons” section (Screen 6).
And look for the “Speed” item there. To enable double-clicking, you just need to move the slider two lines forward and click “Apply”. Then you will be able to open folders and files on your computer by double-clicking. You can also configure single click and triple clicks. Move the slider of this setting in different directions.
Conclusion
In the article we looked at the question of how to configure a mouse on a computer. These simple tips will be useful to beginners and experienced professionals not only in games, but also in working on the computer and via the Internet. It is advisable to correctly configure the computer mouse to suit your capabilities so that it is convenient for you to use it while working at the computer. Good luck setting up your computer mouse!
Receive new blog articles directly to your email. Fill out the form, click the "Subscribe" button
Many users believe that a computer mouse is a simple device that does not require any configuration. To some extent, this statement is true: after connecting the manipulator to the computer, it usually immediately starts working correctly. However, if you know how to configure your mouse, you can make working with this input device more comfortable.
Mouse options
Often a mouse is bought on a residual basis - just to have it. Only gamers, for whom it is important that the input device responds as quickly as possible, look at the characteristics of the manipulator. The sensitivity is affected by the following parameters:
- Sensor resolution (CPI or DPI) – the higher this indicator, the better the sensitivity of the mouse. CPI represents the number of changes in cursor position recorded when the mouse moves 1 inch (2.54 cm).
- Polling frequency – characteristic of the USB port polling rate. The higher the better.
- Response time should be minimal.
Additional buttons, connection interface, USB interface or wireless connection - all this also affects the ease of working with the manipulator. But we will not dwell in detail on the rules of choice; It’s better to take a closer look at how to adjust mouse sensitivity.
Manipulator settings
If, when you move the cursor, it starts jumping around the screen, and you have to aim for a long time to get to the desired element of the desktop, then you urgently need to open the mouse settings. The same applies to the situation when a single click triggers a double click, and instead of selecting a folder (file), you open it.
To properly configure the mouse, you need to find its operating parameters in the Control Panel. On Windows 7, you can use the search bar in the Start menu.
Another way is to go to the “Control Panel” and change the display to “Large icons”. The Mouse section will be in the first column on the left.
Open the section and the “Properties: Mouse” window appears, which has five tabs. Let's look at them in detail so that it becomes clear which parameters can be changed manually.
If you are left-handed, be sure to use the button assignment exchange. When this option is enabled, the right button will perform the functions of the left button, and the left button will perform the functions of the right button. That is, you will select, open and drag with the right button, and, for example, call the context menu with the left. 
If you have problems with double-clicking (you don't have time to click twice), reduce its speed using the slider.
The required value is selected experimentally: change the speed, save the changes, check the operation.
It’s better not to turn on sticking – it’s not very convenient to work with. You can drag windows and elements without any sticking.
If you are only interested in sensitivity, then go straight to the “Pointer Options” tab. There is a slider here that allows you to set the speed of the pointer.
- Check the “Enable increased pointer precision” checkbox.
- Set the optimal driving speed.
The higher you set the speed, the more changes in cursor position will be recorded when you move the mouse one inch.
If you set the value to the minimum, it will take a lot of time and a lot of mouse movements to move the cursor from one end of the screen to the other.
If you set the maximum permissible value, then the cursor will “fly” from any, even the smallest movement of the manipulator. 
The pointer trail, hiding the cursor, and showing it when the Ctrl key is pressed can be left unconfigured: these parameters do not affect the operation of the manipulator.
Don't forget about the mouse wheel - it can also be customized to make scrolling the page vertically and horizontally as comfortable as possible. When you go to the Wheel tab, you will see two options:
- Vertical scrolling.
- Horizontal scrolling.
For both parameters, only one value is set - the number of scrolled lines per one turn of the wheel before clicking. By default, 3 lines are scrolled, but you can set any convenient indicator. 
You can explore the “Equipment” and “Pointers” tabs yourself - there are no important mouse operation parameters in these sections. Through the “Equipment” tab, for example, the properties of the manipulator are opened (the same actions are performed through the “Device Manager”). In the “Pointers” section, you can choose the type of cursor for different situations, as well as the parameters for its display.
As a rule, after purchasing a new mouse, you need to make settings for yourself: adjust the buttons and wheel, adjust sensitivity and speed, as well as color and various visual effects. Today we'll figure it out how to configure the mouse inWindows on a computer or laptop.
Instructions for setting up a mouse in Windows 7
First of all, you need to go to the mouse settings:
Alternative options to go to mouse settings:
- Open “Start”, go to “Control Panel”, find the “Mouse” section there;
- Or “Start” - “Devices and Printers”, find your mouse there and use the edit mouse button to bring up properties.
What settings should be made on the mouse?
Once you get to the settings section, a window will appear:
A little more detail on the tabs:
Mouse buttons
- Change button assignments - this function is useful for those who work with their left hand. The left and right buttons will switch places;
- Double-click speed – determines the time at which the second click will be counted as a double. If the reaction is fast, then you need to set it higher. If you don’t have time to click again in time, you should do it below.
- Sticky – Allows you to drag without having to hold down the mouse button.
Pointer Options
It is in this section that you can use it when working on a computer or laptop. More details:
- Move – the speed at which the mouse moves across the desktop;
- Initial position in the dialog box - by activating this function, the mouse pointer will by default immediately be located on the button that you press most often. For example, in the dialog box there are options for “Accept” and “Cancel”. If you click “Accept” more often, Windows will recognize it as the preferred option and will automatically place the cursor there when a new window appears.
- Visibility – here you can:
— Enable or disable mouse trail (personally annoying me);
— Hide the pointer when typing on the keyboard;
— Indicate the location of the pointer when pressing Ctrl (a useful feature for those who often lose the mouse cursor on the monitor screen).
Wheel
In this section, you can configure the number of lines that will be skipped on the screen when scrolling the wheel one click vertically. And also the number of characters when scrolling horizontally.
Signposts
This section of the mouse settings is intended for the design of the cursor. There is no need to describe it, here you can select a theme, enable a shadow for the mouse, and select a cursor image.
Equipment
In this section you can view the technical specifications of the mouse, driver, etc. Nothing useful for the average user.
These are the usual settings for a standard mouse. For gaming mice, it is often necessary to make additional configurations, for example, setting up macros for buttons.
Video on setting up a computer mouse on Windows
I hope the article " How to set up a mouse in Windows on a computer or laptop"was useful to you.
12.10.2009 20:51
Most Windows users know how to change the mouse pointer appearance. But almost no one adjusts mouse settings like double-click speed or mouse pointer speed. And in vain. After all, a properly configured mouse significantly improves the convenience of working on a computer.
To start customizing your mouse, open Control Panel -> All Control Panel Items -> Mouse.
Mouse Buttons Tab
Change button assignments. If you enable this function, the left mouse button will perform the functions of the right mouse, and the right button will perform the functions of the left mouse.
Double click speed. Move the slider and adjust the double-click speed by clicking on the folder image next to the slider.
Mouse Button Stuck. If you enable this feature, you can drag and drop files and folders without holding down the button. It is enough to hold down the mouse button for a few seconds and the selected object will “stick” to the mouse pointer. To “release” an object, you need to click. The same thing applies to window scaling. The time required for sticking to activate can be adjusted by pressing the button Options and moving the slider.
Index Options tab
Moving. You can use the slider to speed up or slow down the movement of the mouse pointer across the screen. The higher the screen resolution, the slower the mouse pointer moves, which leads to unnecessary strain and increased fatigue in the wrist muscles. Adjust the pointer movement speed so that the mouse pointer can easily move across the entire diagonal of the screen with one hand movement along the entire diagonal of the pad. If you have set the maximum movement speed, but the mouse pointer moves slower than necessary, then uncheck Enable increased pointer accuracy, this will speed up the mouse even more. A very useful feature in our era of large monitors and high screen resolutions. It’s strange that almost no one configures this parameter!
Home position in dialog box. Each dialog box has several buttons, one of which is selected as the default (the button that the user is most likely to use). The default button is highlighted blue in Windows 7. If you want the mouse pointer to always be automatically set to the default button when opening dialog boxes, enable this option. A convenient feature once you get used to it.
Visibility. Here you can adjust the visibility of the mouse pointer:
- Show mouse trail;
- Hide the pointer while typing;
- Indicate the location of the pointer when the Ctrl button is pressed.
Experiment with these options and turn on the ones you need.
Wheel tab
Here you can adjust the speed of horizontal and vertical scrolling of text documents, web pages and other windows using the wheel.
Vertical scrolling. You can set the number of lines to rewind when you turn the wheel one click. If you set the value to one screen, then turning the wheel one click is equivalent to pressing the Page Up or Page Down button on the keyboard.
Horizontal scrolling. This option is designed for mice that support horizontal scrolling by tilting the wheel. You can set the horizontal scrolling speed by specifying the number of characters to rewind.
Indexes tab
Perhaps this tab is familiar to most Windows users better than all other tabs. After all, here you can change, add and delete display schemes (type) of the pointer.
To select one of the system schemes, use the drop-down list Scheme. An open diagram can be modified using the area Settings. Highlight the mode and use the button Review change the pointer view in this mode.
To remove an installed scheme, select it from the drop-down list and click the button Delete. System (pre-installed) schemes cannot be deleted.
Some Windows 7 themes change the appearance of the mouse pointer. To prevent themes from doing this, uncheck Allow themes to change mouse pointers.
To disable the shadow cast by the mouse pointer, clear the checkbox Enable mouse pointer shadow.
Hardware tab
This displays information about the status of the device and mouse driver. Pressing the button Properties, you can update, uninstall, or rollback the driver and view additional information about the mouse, as if you had opened the mouse properties in Device Manager.
Additional Mouse Features
Fast scrolling of long documents
To enable fast scrolling on a web page or text document in Word, click on the wheel and move the mouse up, down, or sideways.
Special abilities
To set up mouse accessibility, open Control Panel -> Ease of Access Center and press Making the mouse easier to use(changing the settings of a mouse or other pointing device).
