Various ways to insert a diameter icon in Windows applications. Sekh Kirov dating How to indicate diameter on the keyboard
chambenna - 03/11/2019 at 07:38 - 5 Comments
Natasha’s gynecologist broke into a grin, and the nurse working with him immediately took Natasha’s card from a wooden box. Irinka has long regained the kilograms lost during her illness and regained her former complexion. Her peach cheeks exuded a warm light, and her huge black eyes sparkled dangerously. Especially when she glanced at the doctor, amusingly caring for the lady invited for him. The surgeon was confused and looked confused at the young lady sitting next to him, but her brother saved the situation. Already lying in bed, she and Vadim discussed what to name the upcoming baby. This had to be decided in advance, because Vadim is in Moscow in May. It won’t, and it is possible that he will end up sailing again, and the baby will need to be registered. Natasha was in the kitchen fiddling with dinner when her neighbor looked out from her own room. Natasha turned around in fright. What's happened. Is it really Polina Mikhailovna... They deftly peeled the potatoes and set them to boil, huh. We decided to have a cup of tea right there in the kitchen. Bella Lvovna expressively raised her eyes to the ceiling. Bella Lvovna rose heavily from the stool, removed the lid from the pan and poked the boiling potatoes with a fork.
Dementy - 03/11/2019 at 07:38 - 12 Comments
Next to the garage, Nastya saw another building, not as impressive and unlike the garage with windows. In a fairly spacious, bright and extremely warm room along the walls there were enclosures in which cats and dogs of all imaginable colors and breeds and of various ages lay, sat, wandered or played. So, either Vtorushin or Fedulov, Nastya thought. It is curious which of them turned out to be so kind-hearted. Nastya followed. Behind him, peering at the animals. Her attention was attracted by a large fluffy dog, lying offensively in the depths of the enclosure, with its muzzle buried. In the paws. Nastya stopped again, this time near the enclosure in which three spotted black and white kittens were playing. They returned to the door and were about to go outside, but Nastya suddenly slowed down and turned to the enclosure with the old dog. From the menagerie, a path led to an alley starting from the park façade of the main house and stretching all the way to the river. They walked slowly from the house towards the river, and the air became cooler and damper with almost every step. Nastya looked at him with enthusiasm. He was embarrassed and turned away. They again found themselves on the alley and continued moving towards the river.
Elena - 03/11/2019 at 07:38 - 8 Comments
Community. So it's definitely connected. It will be necessary to think about how to check this. Now it remains to clarify the question of his love relationship with Voronova. On Andrey's face. Konstantinovich did not move a single muscle. Either he is an actor himself, which one to look for, then. I didn’t feel a joke in the question, whether there really was nothing to hide here. They talked for another half hour, after which Ruslan began to say goodbye and finally played the last card he had up his sleeve. In the morning he received a call from the editorial office and was asked to find an opportunity to conduct short interviews with some recognizable people about what they thought about the agreement signed in Belovezhskaya Pushcha and about the possible development of events. Exactly. Irina mentioned this name when she listed everyone living. Apartment. It’s curious how long she plans to keep Ruslan in the hallway. He didn't read the book.
Inga - 03/11/2019 at 07:38 - 9 Comments
But Larisa hoped in vain. There was poison in the wine. Kneeling on a newspaper bed, Zubov twirled it in his hands. A small silver figurine. Nastya snatched the silver Cupid from Korotkov’s hands and fixed her eyes on the thin, graceful letters. Mile from Volodya with love. Olshansky approached them and extended them. A bunch of keys taken from Larisa's purse. Having given the silver Cupid to the investigator, send Nastya and Yura Korotkov home to the Tomchaks. Larisa Mikhailovna, this is Gera Zolotovsky’s mother. He became restless again, I wanted to consult with you, maybe.
siborgprel - 03/11/2019 at 07:38 - 7 Comments
The door to the scientific secretary's office did not open, and the brave lieutenant colonel. Didn't get out of it. Nastya, after hesitating slightly, took out her phone and dialed Bychkov’s number. Nobody answered. Then she called Korotkov. Why aren't you going? Yura immediately attacked her. She promised. Sorry, Yurochka, I got tired. Here you can spend half your life just waiting. For half a day I stand in the corridor, like cattle at an exhibition. Everyone walks by, but there’s no point. You did what I asked. Well and.
epupgremeth1974 - 03/11/2019 at 07:38 - 10 Comments
Sorry. She heard it and said it politely. I said that you have extremely beautiful hair. “Thank you,” the woman answered coldly, again burying her face in the textbook. You weren't even taken aback. Surely this is often said to you. the hungry man was not far behind. Often, Lilya lied, without looking up from the cynics. A. Have you ever been told that such beautiful girls should not only receive an education, but also have fun, relax, and enjoy life. And how do you feel about it? You agree with this statement. Lilya chewed another portion of the soft, tasteless cabbage.
Naum - 03/11/2019 at 07:38 - 2 Comments
Like a measured night, he slipped into his own yard. There was a large dark bag on the bench next to Seryozha. If I had retained the ability to have fun that morning, I would certainly have burst out laughing, looking at Serezha’s elongated face. I think he even lost the power of speech for some time. V. The devils were dancing in front of me, and I realized that our squabble had gone too far to become the property of the ears of Seryozha Lisitsyn and my daughter. After turning off the TV, we came to the unfortunate conclusion that we were going in the wrong direction. The cassette was on its own, and had nothing to do with the murders. She did not have two leading actresses. Leaving for the beach, we promised Ira to return for lunch, so that later we could all go to the hotel to watch the meeting of the bright screen star Oleg Yushkevich. Tatyana walked with us to the embankment and went to Vernigora’s neighbor. Rita appeared.
Antip - 03/11/2019 at 07:38 - 0 Comments
But at the moment, you are a grown man, you send people behind bars, you control their destinies. Everything is like a small one, Aunt Nastya and Aunt Nastya. Well, why are you pestering the guy, she stood up for Maxim. There is nowhere to put the energy. Better tell us what kind of corpse you have there. Student. Alone, Yura muttered darkly. Already the 3rd. Or maybe the 4th or the 6th, the jester will sort them out. That is.
Not all symbols are located on the keyboard. There is also no diameter symbol on it. But this does not mean that it cannot be inserted into most modern applications. There is such a possibility. Moreover, this operation can be done in completely different ways. The most universal among them is the use of ASCII codes. The second method is tied to the Microsoft office suite and works only in it. The last method is related to To implement it, you need the original diameter icon, which will then be added to the new application by copying and pasting. Each method will be discussed in detail in this article.
When does such a need arise?
There are many cases in which it becomes necessary to insert the “Ø” sign in For example, it may be needed when drawing drawings, preparing price lists, creating advertising bouquets or explanatory notes for pipe products or shut-off valves. This list can be continued further, but it is clear that, although not so often, but
Sometimes you have to insert a diameter icon into an electronic document.
Using codes
The most universal method is based on the use of ASCII codes. It is implemented using the capabilities of the Windows operating system itself, so it is not tied to any one strictly defined application. First you need to remember the special code - “0216”, which corresponds to “Ø” in the ASCII code table. And the input order in this case is as follows:
- We change the input language until “En” (“English”) appears. If this is not done, then “Ш” will be entered instead of “Ø”.
- Next, turn on the digital extended keyboard. Its activation is indicated by the “Num Lock” LED. If it is on, then nothing needs to be done.
- Then we go to the work area of our application if it is minimized. To do this, just click on it on the taskbar. Then we move the pointer of the manipulator over its work area and make one click with the left button. At the same time, the cursor in it should blink.
- At the next stage, hold down the “Alt” key (it doesn’t matter which side, you can do it on the left or on the right). Then, without releasing it, sequentially dial “0-2-1-6” on the right numeric keypad. Remove your hands completely and after that the diameter icon should appear.
The main advantage of this method is its versatility. It works in most modern programs. There is no need to search for the original symbol. The disadvantage of such a solution is that you need to remember the code. If you only need this one icon, then there is no problem. It's worse if there are several of them. In this case, it is better to print out a table of codes for the most frequently used characters on a piece of paper and use it periodically.
Word and other office applications
The alternative input method “Ø” is tied to a specific group of software products. This is an office suite from Microsoft that includes Word, Exel and other applications. Let's enter the diameter icon in Word as an example. In other cases, the entry procedure is similar. While working, go to the toolbar called “Insert”. It is located at the top of the screen between the “Home” and “Page Layout” tabs. Move to this inscription and press the left button once. Then on the right side of the screen we find the “Symbols” subpanel. On it, select the “Symbol” item and in the list that opens, select “Other symbols”. All these manipulations are performed with the right mouse button.
An insert window will open. In it we find the “Ø” we need by scrolling the symbols. This can be done using a special wheel or by repeatedly pressing the left button of the manipulator on the strip on the right. When you have found “Ø”, select it by pressing the left button of the manipulator once and press the “Insert” button (located in the lower right part of the window). Then close the window. After this, the diameter icon should appear in Word (in its work area). The disadvantage of this method is that it only works in one group of applications. Therefore, it will not be possible to use it everywhere.
Clipboard
Another method of inserting “Ø” is based on using the clipboard and a combination of the “Copy” and “Paste” operations. First you need to find this symbol somewhere. For example, you can insert a diameter icon in Word in accordance with the previously described method. Then select it and copy it (you can use the keyboard shortcut “Ctrl” + “C”). Then we go to another application and use the insert operation (“Ctrl” + “V”). The disadvantage of this solution is that the original symbol is needed. But it is not always available.
Finally
There is no diameter icon on the keyboard. But it can be entered without any problems using one of the three proposed methods. The simplest and most universal of them is based on the use of so-called ASCII codes. It is not tied to one application and works in almost all programs of the operating system.
When creating technical diagrams and drawings in Word, a huge number of special signs and symbols are used. But, as you know, not all characters can be entered from the keyboard. For example, there are several ways to add a diameter icon in Word: by inserting symbols and using the symbol code. Below we will take a closer look and look at the pictures.
Inserting a "diameter" symbol
To insert a diameter icon in a document you need to:
Inserting a “Diameter” sign using a code
In MS Word, special characters have their own individual code. You can use a code and a keyboard shortcut to insert a diameter symbol in your document. Go to “Insert” - “Symbols” - “Other Symbols”. In the “Set” indicate “Additional Latin-1”. Find the diameter sign and click on it. In the symbols window, just below, there is a line “Sign Code”, opposite which the code is written. Remember it and close the “Symbol” window.
Write this code in the place where you need the diameter symbol and press the key combination Alt+X (x is an English letter).
Using the methods described above, you can quickly write the diameter designation in Word.
The MS Word text editor has a fairly large set of special characters, which, unfortunately, not all users of this program know about. That is why, when the need arises to add this or that symbol, sign or designation, many of them do not know how to do it. One of these symbols is the diameter symbol, which, as you know, is not on the keyboard.
All special characters in Word are in the tab "Insert", in Group “Symbols”, to which we need to turn for help.
1. Place the cursor at the place in the text where you want to add the diameter icon.
2. Go to the tab "Insert" and click there in the group “Symbols” on the button "Symbol".
3. In the small window that will open after clicking, select the last item - “Other symbols”.
4. A window will open in front of you "Symbol", in which we have to find the designation of diameter.
5. In section "Kit" select item “Augmented Latin-1”.
6. Click on the diameter icon and press the button "Insert".
7. The special character you selected will appear in the document in the location you specified.
Adding a “diameter” sign using a special code
All characters that are in the “Special Characters” section of Microsoft Word have their own code designation. If you know this code, you can add the required character to the text much faster. You can see this code in the symbol window, in its lower part, by first clicking on the symbol that you need.
So, to add the “diameter” sign using code, do the following:
1. Place the cursor at the location where you want to add the symbol.
2. Enter the combination in the English layout “00D8” without quotes.
3. Without moving the cursor pointer from the set position, press the keys “Alt+X”.
4. The diameter sign will be added.
That's all, now you know how to insert a diameter icon in Word. Using a set of special characters available in the program, you can also add other necessary characters to the text. We wish you success as you continue to explore this advanced document management program.
